Xerox DocuTech 128 HighLight Color Przewodnik Instalacji Pobierz pdf (Strona 64)

4-36 DocuTech 128/155/180 HighLight Color Installation Planning Guide

Prepare for installation

Heat management

The DocuTech system produces significant amounts of heat when

running in a production environment. The heat produced by the

system must be considered when selecting a suitable location.

Heat management assessment process

Consult the site HVAC engineer or contractor to determine

whether the heat output can be managed by air conditioning at the

site. Consider the following items when assessing the acceptable

environmental operating conditions for the system:

• heat output of the system when in operating mode (32,770

BTU/hour)

• current relative humidity and temperature of the site

• acceptable system environmental requirements

• high outside temperatures

• incoming airflow rate in total cubic feet per minute (CFM)

Heat Vent Kit options

If the customer site in which the printer will be located is small and

adequate venting is an issue, heat vent kits are available for

purchase by the customer.

The Heat Vent Kits provide the customer with the ability to vent the

excess heat produced by the printer through the ceiling.

The kits are available through CAS and include installation

instructions for the Xerox service representative. Also, a kit is

available for the 50Hz or 60 Hz configuration.

Item Order Number

Heat Vent Kit 98K06472

Interposer Heat Vent

Extension Kit

98K42600

Inverter Feeder/Stacker

Heat Vent Kit

98K64840

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 85 86

Brak uwag

Xerox DocuTech 128 HighLight Color Przewodnik Instalacji Strona 64